SKU: 59509015722
philodendron campi

philodendron campi Philodendron campii 'Lynette' – Foliage Factory

Sale price$22.40 Regular price$24.89
Save 10%

Pay in installments of $6.22 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 3 - Aug 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

philodendron campi Philodendron campii 'Lynette' – Foliage FactoryPhilodendron campii 'Lynette' Philodendron campii 'Lynette' is a rosette forming Philodendron with long, narrow green leaves rising from a short central stem. The plant forms a rounded shape in the pot, with arching leaves that layer outward as it matures. The glossy to semi glossy leaves are usually narrow oblong to lance shaped, with a clear midrib and petioles that angle outward from the centre. New growth appears from the middle of the rosette,

Philodendron campii 'Lynette'

Philodendron campii 'Lynette' is a rosette-forming Philodendron with long, narrow green leaves rising from a short central stem. The plant forms a rounded shape in the pot, with arching leaves that layer outward as it matures.

The glossy to semi-glossy leaves are usually narrow-oblong to lance-shaped, with a clear midrib and petioles that angle outward from the centre. New growth appears from the middle of the rosette, while older outer leaves gradually age away around the base.

How Philodendron campii 'Lynette' forms its rosette

  • Rosette habit: Short central stem with leaves arranged in a rounded form.
  • Leaves: Long, narrow green blades with a glossy to semi-glossy surface.
  • Pot habit: Self-supporting shape that stays upright without a moss pole.
  • Base care: Needs even moisture, drainage and air around the short stem.

Wet-forest origin of Philodendron campii

Philodendron campii comes from wet tropical forests in Colombia, Ecuador, Peru and northern Brazil. Its usually epiphytic, rosulate habit suits an open mix that stays slightly moist without becoming dense around the short stem.

The central growth point should not sit in a wet, compacted mix. A proportionate pot, free drainage and careful watering help protect the base while the narrow leaves continue rising from the middle of the plant.

Caring for the short stem of Philodendron campii 'Lynette'

  • Light: Give bright indirect light; direct midday sun can mark the narrow leaves.
  • Watering: Water when the upper 20–30% of the mix has dried, then let excess water drain fully.
  • Substrate: Use a chunky aroid mix with bark, perlite or pumice, and a moisture-holding organic component.
  • Humidity: Moderate to good humidity helps fresh central leaves expand smoothly.
  • Temperature: Best kept warm, ideally above 18°C, with protection from cold glass, draughts and winter transport stress.
  • Potting: Choose a stable pot with drainage; repot only when roots have clearly filled the current container.
  • Fertilizing: Feed lightly during active growth with a balanced fertiliser at reduced strength.
  • Propagation: Usually propagated from basal shoots or specialist nursery production, not from single leaf cuttings.
  • Pruning: Remove ageing outer leaves close to the base without cutting into the central growth point.
  • Semi-hydroponics: Can adapt to mineral substrates such as pon, pumice, lava or LECA if the short stem stays above the wet zone.
  • Growth rate: Usually moderate indoors, with the rosette widening gradually as new leaves replace older outer growth.

Philodendron campii 'Lynette' problems around the base

  • Yellow outer leaves: One old leaf at a time is normal; several at once usually points to a wet root zone or low light.
  • Soft base: Check the central stem and substrate depth; reduce watering and improve aeration if the base stays damp.
  • Brown leaf tips: Look for irregular watering, dry air near heat sources or mineral-heavy water.
  • Small new leaves: Move the plant closer to bright filtered light and check whether the roots are cramped or staying too wet.
  • Pests: Check the leaf bases and undersides for spider mites, thrips, mealybugs or scale, especially on stressed plants.

Philodendron campii 'Lynette' pet safety

Like other Philodendron, Philodendron campii 'Lynette' contains calcium oxalate crystals. Keep it away from pets that bite plants, and wash hands after pruning or removing damaged leaves if your skin is sensitive.

Philodendron campii etymology and publication

The genus name Philodendron comes from Greek roots meaning tree-loving. Philodendron campii was described by Thomas B. Croat in Aroideana in 2004. The epithet campii is a Latinized commemorative name based on the surname Camp.

Order Philodendron campii 'Lynette' for a compact, narrow-leaved rosette Philodendron with a clean upright shape in the pot.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59509015722

Discover Niche Categories That Outsell philodendron campi

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Andy
Boise, US
★★★★★ 5
Made a big improvement in cabin noise—highly recommend
Model: SLH20025
Siless Hybrid made a huge difference in reducing noise in the floor of my truck cabin. In some areas, there was basically just bare sheet metal between the inside and outside, so adding this really helped the truck feel more solid and noticeably quieter on the road. I used Kilmat on the doors, and honestly I wish I had used Siless Hybrid there too, but it was too late by the time I realized the difference. This material is very sticky, easy to cut, and simple to apply, which made the install pretty smooth. Just a heads-up: the tacky side gets messy and will bond to clothing really easily, so be careful during installation. Overall, I’d definitely buy it again—great product with real results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
A
Verified Purchase
AmazinFrank
Pawtucket, US
★★★★★ 5
Very good product at a fair price
Model: SLH20025
Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
E
Verified Purchase
Eric Caldeira
Boise, US
★★★★★ 5
I wish I had Siless 20 years ago!!!
Model: SLH20025, Model: SLH20025
I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2025
M
Verified Purchase
Mark Kadrich
Battle Creek, US
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
J
Verified Purchase
Josh
Omaha, US
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026

recommand products